Microstructural Analysis and Mechanical Properties of Cr 13 Ni 5 Mo 2 Super Martensitic Stainless Steel

Type : Article de conférence
Auteur(s) :  Samira.TLILI, Chems.Eddine. RAMOUL, Kheireddine. SLIMANI, Toufik. CHOUCHANE, Tarek. HAZEM, Chaima. TOUHAMI
Année :  2016
Domaine : Sciences des matériaux
Lieu de la conférence:  Antalya, Turquie
Résumé en PDF :  (résumé en pdf)
Fulltext en PDF :  (.pdf)
Mots clés :  Super Martensitic Stainless Steel, heat treatment, structure, mechanical properties, wear.

Résumé : 

Super martensitic stainless steel Cr 13 has been widely used in many applications particularly in the oil field for their superior mechanical properties and a corrosion resistance. In the present work, we study the microstructure and mechanical properties of a super martensitic stainless steel Cr 13% Ni 5% Mo 2% after quenching treatment at 1050 °C and tempering at 700 °C for 1 hour. Chemical analyzes were obtained by X-ray fluorescence and EDS / SEM. The experiment results that microstructure after heat treatment consisted of martensite and residual austenite estimated at 29%.For mechanical analysis, several methods of investigation were used namely micro indentation, testing tensile and charpy impact test. The friction wear is investigated in dry conditions and ambient air by pin-on-disk tribometer at 2, 6 and 10N load against WC ball. The friction coefficient (COF) varied from 0.62 to 0.56 and wear rate varied from 2.4 10-3 (mm3/N.m) to 0.6 10-3 (mm3/N.m). The wear mechanism was studied by scanning electron microscopy.