Physique

Nombre total de résultats :295
Pertinence Titre A-Z Plus récents Plus anciens
10 25 50
Année de publication
et

Champs Thermiques Sous L’effet de la RéactionChimique du Reformage Interne Direct d’une PileSOFC

Dehimi Said, Bendris Tarek, Mebarki Besma  (2013)
Article de conférence

Cette étude présente les champs thermiques d’une pileà combustible standard (Ni-YSZ//YSZ//LSM) type SOFC à anodesupportée. Cette étude est faite dans le plan perpendiculaire àl’écoulement des gaz. La PàC est alimentée par l’air et lecarburant; CH4, H2, CO2, CO et H2O d’où la naissance duphénomène du reformage interne direct (RID-SOFC). Elle estbasée sur les réactions chimiques de reformage; la réaction devaporeformage et la réaction du gaz à l’eau. Le but principal dece travail est la visualisation des champs thermiques sous l’effetdes réactions chimiques globales et la confirmation ducomportement thermique de cette réaction chimique. Les champsthermiques sont obtenus par un programme informatique(FORTRAN). Voir les détails

Mots clés : Pile à combustible SOFC, Reformage interne directe, Réaction chimique globale, Carburant, Anode supportée, Champsthermiques.

Modélisation thermique du problème de soudage par friction malaxage FSW dansun système de coordonnées mobile

BOUKRAA Moustafa, AISSANI Mouloud, ZITOUNI Abdel Halim  (2013)
Article de conférence

Dans ce travail, une modélisation du transfert dechaleur induit par le procédé de soudage FSW estmenée sur des tôles d’alliage d’aluminium. Enutilisant le modèle de source de chaleur deColegrove (2000), une simulation numériquetridimensionnelle est faite avec le code COMSOLMultiphisics basée sur la méthode des éléments finis.Le système de coordonnées est supposé lié à l’outil.Les résultats obtenus montrent une bonneapproximation du phénomène selon les référencesbibliographiques Voir les détails

Mots clés : transfert de chaleur, FSW, méthode des éléments finis, COMSOL-Multiphisics.

Ultrasonic Backscatter Coefficient Estimates in a Soft Tissue Mimicking Phantom

Nesrine HOUHAT, Tarek Boutkedjirt  (2013)
Article de conférence

The ultimate goal of characterization methodsbased on the backscatter coefficient (BSC) estimates isto obtain structural information about samples independentlyof the measurement system. In the current study,measurements of the BSC were obtained from TissueMimicking Materials (TMM) or phantoms. These consistedof a mixture of gelatin and distilled water containingmicroscopic graphite particles with a mean radius of 18micrometers, which were randomly distributed. Phantomsconcentrations ranged from 50 to 200 g of graphite per literof gelatin. Two BSC estimation methods were used andtheir results were compared to Faran’s scattering theorywhich allowed the estimation of the number density ofgraphite particles in the phantoms. Moreover, measurementsof the attenuation coefficient and the ultrasonicpropagation velocity in phantoms were performed. Theevolution of the attenuation coefficient and the BSC as afunction of frequency and scatterers’s concentration in afrequency range from 1.5 MHz to 6 MHz will be presentedusing two transducers of nominal frequencies 2.25 MHzand 5 MHz. Decreasing of the attenuation coefficient withfrequency and graphite concentration will be showed. Voir les détails

Mots clés : Ultrasound, Attenuation, backscattering, TMM

Graphene: Material description, elaboration methods and main properties

S.MAHDID, N.DOKHAN, A.KELLOU  (2013)
Article de conférence

Nanomaterials containing carbon have open new ways for the development of interesting and innovator applications. Among these materials, the mother of all graphite shapes, the graphene, is becoming a material of a great interest because of their remarkable properties (physical, chemical and electrical ones). Currently, the graphene presents a great promise for potential applications in many technological fields such as: sensors, composites, transparent conducting films, solar cells, storage medium of gas, saturable absorber for pulsed laser etc.The development of graphene is a technological challenge; the methods of current production are required with a balance between the facility of the production and the quality of materials. Our present work consist on a digest of the most significant works and protocols presented by the scientific community. It selects ones which ensure a graphene with optimal properties; it also discuss the main physical and chemical phenomenon responsible of the graphene formation. Solvothermal technique is an interesting way to synthesize graphene sheets. Firstly Graphene Oxide (GO) is elaborated, followed by its reduction in different solvents (for example: hydrazine, L-glutathione, Dimethylhydrazine, aluminum powder, etc.). This last approach is regarded as more suitable because of its simplicity, reliability, adequacy on a large scale and production at low cost. Voir les détails

Mots clés : Graphene, solvothermale technique, Chemical reduction

Study the influence of temperature on the mechanical behavior of low density polyethylene (LDPE) by genetic algorithms (GA)

M. Boulkra, A. SOUAHI, W. Ghabeche, H. Serrar, S. BENAYECHE, A. Grid, M. ATHMAINI, S. AMARA, A. BOUAZDIA  (2013)
Article de conférence

Mathematical models are more and more used to simulate law mechanical of materials.In this work, genetic algorithm (GA) [1] was performed to determine the law of tensile mechanical behavior of low density polyethylene (LDPE), for a uniaxial tensile test .The parameters taken into account are the constraints based deformation for temperatures as 25 ° C and a strain rate included between 5.10-3s-1 and 50.10-3s-1 . . Our simulation results are compared with experimental work.To do this, and to approach the law of the mechanical behavior of the material used in our work, we opted for the method of genetic algorithm , or GA, as a method of simulation, we have applied to LDPE. Voir les détails

Mots clés : polymer, LDPE, mechanical response, Genetic algorithm, effect of temperature

Microstructural and magnetic characterization of Cu-Ni nanocrystalline powders.

A. Mebrek, S. Souilah, S. Alleg, M. Bououdina, J.J Suñol  (2013)
Article de conférence

Cu50Ni50 nanocrystalline powders have been prepared by mechanical alloying from pure elemental Ni and Cu powders in a planetary ball mill, at room temperature, under argon atmosphere. Morphological, structural, microstructural and magnetic properties of the ball milled powders were characterized by scanning electron microscopy, X-ray diffraction and vibrating sample magnetometer. The total mixing of the elemental powders gives rise to the formation of Ni(Cu) and Cu(Ni) solid solutions. Both the saturation magnetization and the coercivity decrease from 53emu/g and 39.4Oe, respectively, for pure Ni to about 12.65emu/g and 19.5Oe after 30 h of milling. Voir les détails

Mots clés : Cu50Ni50 nanocrystalline powders, Mechanical Alloying, Microstructural and magnetic properties.

Caractérisation mécanique du verre par indentation Vickers

S.BENAYACHE, M.Amrani, K.Boubendira, M.BOULKRA, W.Ghabeche  (2013)
Article de conférence

L’alumine est un composé chimique qui existe à l’état naturel dans le minerai de bauxite. Elle est parmi les matériaux les plus utilisés constituant une part importante dans la technologie moderne. Dans ce travail nous avons évalué la résistance à l’usure de deux alumines industrielles différemment poreuses en mesurant la perte de masse en fonction du temps et de la taille d’abrasifs. Les tests de frottement et d’usure sont menés sur une polisseuse sous les mêmes conditions (vitesse, charge et temps), sur des abrasifs à gros et fins grains. A travers les résultats obtenus nous remarquons d’une part une amélioration de la résistance à l’usure pour l’alumine qui ne comporte pas beaucoup de pores. En outre des observations au MEB nous ont permis de confirmer les résultats obtenus relatifs à l’usure, en particulier l’endommagement plus prononcé des états de surface de l’alumine A2 plus que l’endommagement des états de surface de l’alumine A1. D’autre part la résistance à l’usure est d’autant plus faible que la taille des grains d’abrasif est fine. Voir les détails

Mots clés : verre, indentation vickers, vitro-céramique, dureté, ténacité

Parameter Determination of a Rosen Type Piezoelectric Transformer Operating in Second Mode

Faiza Boukazouha, Guylaine Poulin-Vittrant, Louis Pascal Tran-Huu-Hue, Marc Lethiecq  (2013)
Article de conférence

In this paper, a single layer Rosen type piezoelectric transformer is produced using a hard PZT piezoelectric ceramic. It is then tested. A theoretical understanding of its operation is developed through 1D analysis based on an analytical solution of a linear system of equations that represents boundary conditions. The method validity was verified experimentally for a transformer operating in second mode and good matching was observed between the computed results and the experimental ones for the unloaded and the loaded transformer, despite some discrepancies. By considering the measured equivalent circuit constants using admittance circles, the fitting is improved. Voir les détails

Mots clés : piezoelectric ceramic, PZT, Rosen type

Modélisation thermique 3D du comportement du bain de fusion lors du soudage TIG -source de chaleur mobile-

Abdel Halim ZITOUNI, Mouloud Aissani, Younes Benkedda  (2013)
Article de conférence

Dans ce travail nous nous intéressons à la modélisation thermique à la simulation numérique du comportement du bain de fusion lors du soudage TIG (Tungstène Inert Gaz) des tôles d’acier inoxydable 304L.Nous décrivons un modèle mathématique de transfert du flux thermique créé par l'arc électrique du procédé sans métal d’apport. Ce modèle tient compte de l’effet du changement de phase et néglige dans une première approche les effets convectifs dus au mouvement du métal liquide dans le bain. Ce dernier est supposé ayant une surface libre plane. Une simulation numérique en 3D du soudage avec une source de chaleur mobile de forme Gaussien est menée par la méthode des éléments finis. Notre modèle est implanté dans le code du calcul Comsol®4.2.Les résultats obtenus concernent les champs thermiques à différents instants décrivant la progression de la température et la fonction d’interface liquide/solide (fraction liquide). Les résultats obtenus sont en bonne adéquation avec la littérature. Voir les détails

Mots clés : soudage TIG, modélisation thermique, bain de fusion

Structural, electronic properties of compounds AlAs, BAs and AlP, BP

K. BOUBENDIRA, H. Meradji, S. Ghemid, A.Boumaza, H.Meradi  (2013)
Article de conférence

We determine the structural, electronic properties of AlAs, BAs and AlP BP alloys using the full potential-linearized augmented plane wave method (FP-LAPW) within the density functional theory (DFT). The exchange-correlation potential is treated by the generalized gradient approximation (WC-GGA). The investigation on the effect of composition on lattice constant, bulk modulus and band gap shows not linear dependence on the composition. The ground state properties such as lattice constant, bulk modulus, pressure derivative of the bulk modulus are in good agreement with numerous experimental and theoretical data. For the electronic properties, we used the mBJ-LDA approximation. The bowing of the fundamental gap versus composition predicted on the composition is in a good agreement with experiment. Voir les détails

Mots clés : FP-LAPW, DFT, Ternary alloys, bands structure, bowing gap and thermodynamic propertie